Installation guide

Quadro Manual I: Installation Guide Step 4: Registering a Conference on Epygi's SIP Server
Step 4: Registering a Conference on Epygi’s SIP
Server
You may login directly to Epygi’s SIP Server, if you have already registered your QuadroCS
at
Epygi’s Technical Support Center. If you have not registered with Epygi Technical
Support, you will not be able to login to the Epygi SIP Server.
Using the same login name and password you use for Epygi Support, login to the Epygi
SIP Server at
www.epygi.com under SIP, Login here.
Fig. I-24: SIP Services Login page
Read the SIP Service Terms and Conditions then accept them in order to proceed. The
displayed page now welcomes you and allows you to Subscribe a New Extension.
Fig. I-25: SIP Services welcome page
The Epygi SIP Server handles conferences like a special extension. So Selecting Sub-
scribe a New Extension leads you to a page where you can enter the conference informa-
tion as shown below. The Extension No. is the eight digit SIP number assigned to your
conference. The first five are fixed by the SIP Server and cannot be changed. The last
three are user defined. Notice the check box to enable this extension to be shown in the
Epygi Public SIP Directory.
Please Note: If you enable this extension to be shown in the Epygi Public SIP Directory,
all information related to this extension will be published in the Public SIP Directory, which
is accessible, by anyone on the Internet. To maintain privacy, do not check this box.
QuadroCS (SW Version 3.1.x) 27