Installation guide

Reviewed QUIG by Thomas/Isolde Step 2.2: Basic Configuration

WAN IP Configuration

Your Internet Service Provider (ISP) should provide this information.

• Assign automatically via DHCP - The parameters are set automatically by the ISP.

This is common with cable modem and DSL service.

• Assign Manually requires the administrator to enter the external IP Address, the cor-

responding Subnet Mask, and the IP address of the Standard Gateway. This is

common when you have a static IP address with your ISP.

Fig. I-17: WAN IP Configuration page

lick on Next to display the WAN Interface Configuration page.

QuadroCS (SW Version 3.1.x) 20