Installation guide

Quadro Manual I: Installation Guide Step 1: Installing the QuadroCS
WAN Connection Options
•
QuadroCS behind a router, which is connected to a cable or DSL modem.
Fig. I-3: Configuration: QuadroCS behind a router
In this configuration, the IP router typically acts as a DHCP server for the LAN and assigns
the IP addresses to the PCs and other devices. The Quadro can be connected through its
WAN port directly to one of the router's LAN ports and will get an IP address from the
router. By default, the Quadro acts as a DHCP client on the WAN port.
Please Note: Since Quadro uses STUN by default, it will work with most basic
routers without any further configuration.
Please Note: Initially, the Admin PC must be connected to the QuadroCS’s LAN port to ac-
cess Web Management of the QuadroCS. Later, this PC can be moved to the router’s LAN.
The QuadroCS Web Management can be accessed from any PC in the router LAN after
the Quadro firewall is disabled.
• QuadroCS connected directly to the Internet
Fig. I-4: Configuration: QuadroCS connected directly to the Internet
QuadroCS (SW Version 3.1.x) 9