Installation guide

QuadroCS Manual III: Moderator's Guide Feature Codes
QuadroCS (SW Version 3.1.x) 22
Feature Codes
This chapter describes how the Quadro Conference Server codes allow the moderator and participants to modify the conference environment with
the handset.
Conference Services accessible during the conference:
Invite Participant
To invite a participant dial
b
+ Participant’s SIP address (or
b
+ Routing Number if the Routing Mode is
enabled). This service is available for moderators only.
b
Get the number of participants in the conference
Plays information about the total number of participants in the conference at the certain moment.
cb
Get the state of recording
Plays the state of conference recording (started, stopped or paused).
cc
Lock the conference
Locks the conference. When the conference is locked, nobody can dial in during lockout.
This service is available for moderators only.
db
Unlock the conference
Unlocks the conference. Now participants are allowed to dial in to the conference.
This service is available for moderators only.
dc
Dial out to all users with dial out settings enabled
Initiates the dial-out to all participants currently inactive in the conference but configured to be dialed out (also those
added manually from the handset by moderator). This service is available for moderators only.
eb
Dial out to all users participant to the conference
Initiates the dial-out to all participants currently inactive in the conference. This service is available for moderators
only.
ec
Start or Resume Conference Recording
This service is available for moderators only.
ib
Pause Conference Recording
This service is available for moderators only.
ic
Stop Conference Recording
This service is available for moderators only.
id
Request to Speak
With this key combination, listener requests to speak and a notification hand-up icon is displayed in the Conference
Progress table. The moderator can then switch the particular listener either to speaker or lecture mode. With a
speaker permission granted, listener can speak to the conference along with other participants. With a lecturer
permission granted, listener can speak to the conference having all other participants muted in the conference. This
service is available for listener participants only.
jb
Cancel the Request to Speak
With this key combination, listener cancels his request to speak and a notification hand-up icon disappears from the
Conference Progress table. This service is available for listener participants only.
jc
Please Note: You may accelerate dial out by a pound (#) sign at the end of your dialed number.