User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 39
The Enable/Disable functional buttons are used to enable or
disable ringing on the destinations in the Find Me/Follow Me
table.
The Ring Extension Phone drop down list is used to select
the interval in which the current extension (on which you are
currently configuring the Find Me/Follow Me service) will ring
on the incoming call from the selected caller. With the
Immediately selection, the current extension will ring
immediately as the call comes in.
The Confirmation Passcode text field requires the password
to accept the call for destinations where passcode activation is
enabled (see below). Only digit values are allowed in this text
field.
Fig. III-34 Find Me/Follow Me page
Add opens the Add Entry page to add a destination to the
Find Me/Follow Me table. It consists of the following
components:
Call Type lists the available call types:
• PBX - destination is a local Quadro extensions or Auto
Attendant.
• SIP –destination is reached through a SIP server.
• PSTN –destination is a PSTN user.
• Auto – used for undefined call types. In this case,
routing pattern will be considered here and parsed
through Call Routing Table.
Fig. III-35 Find Me/Follow Me – Add Entry page
The Address text field requires the SIP address (see chapter Entering SIP Addresses Correctly
), extension or PSTN number, where the incoming
call from the certain caller will be ringing. If the address already exists in the table, selecting Save will display the error “Caller address already
exists”. A wildcard is allowed in this field (see chapter Entering SIP Addresses Correctly
). The extension number should be inserted into the Address
text field for the PBX call type. The PSTN number length depends on the area code and phone number.
The Start Ringing drop down list is used to select the interval when the destination will ring after the call from the selected caller comes in to the
current extension. Immediately selection indicates that the destination will ring immediately as the call comes in.
The Ask Confirmation Passcode checkbox is used to enable the password protection of the call. With this option enabled, the destination who
answers the call will be prompted to insert a password in order to accept the call. The confirmation passcode is defined under the Find Me/Follow Me
table (see above).
Intercom
Intercom service is used to call an extension by forcing it to go off-hook and opening two-way communication. The service is particularly used for
announcements addressed to an extension. When the call comes in to the extension which has an Intercom service enabled, called extension ring
once and then will automatically go off-hook (the phone speaker automatically becomes activated) and the caller will be able to make his
announcement.
Please Note: Intercom service requires called extension to use one of the following SIP or analog phones which are able to automatically go off-
hook:
• snom 190
• snom 200
• snom 220
• snom 300
• snom 320
• snom 360
• snom 370
• snom 820
• snom 870
• SNOM MeetingPoint
• Aastra 480i
• Aastra 480iCT
• Aastra 9112i
• Aastra 9133i
• Aastra 9143i(33i)
• Aastra 9480i(35i)
• Aastra 9480iCT
• Aastra 6751i
• Aastra 6753i
• Aastra 6755i
• Aastra 6757i
• Aastra 6757iCT
• Aastra 6730i
• Aastra 6731i
• Aastra 480e (analog phone)
• Grandstream BT200
• Grandstream GXP2000
• Polycom SoundPoint IP 300SIP
• Polycom SoundPoint IP 330SIP
• Polycom SoundPoint IP 331SIP