User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 36
Unconditional Call Forwarding is a service of Quadro that allows the automatic unconditional transfer of incoming calls to a variety of other
The Enable Service checkbox selection activates the unconditional call forwarding service on the current extension.
call from a particular caller should be unconditionally forwarded.
forwarding destinations.
le call types:
Attendant.
gh a SIP
destinations.
The table displayed here lists the destinations where the incoming
Enable/Disable functional button is used to enable/disable the
corresponding forwarding destinations. This is helpful to avoid
removing forwarding destination(s) if they are not applicable at
the moment.
Add opens the Add Entry page to add
It consists of the following components:
Call Type lists the availab
• PBX - forwarding destination is a local Quadro extensions
or Auto
• SIP – forwarding destination is reached throu
server.
• PSTN – forwarding destination is a PSTN user.
– used for un
• Auto defined call types. In this case, the
routing pattern will be considered and parsed through the
Call Routing Table.
The Forward To text field requires the SIP address (see chapter
Entering SIP Addresses Correctly
), a PBX extension or a PSTN
number, where an incoming call from a certain caller should be
unconditionally forwarded. If the address already exists in the
table, selecting Save will display the error “Caller address
already exists”. A wildcard is allowed in this field (see chapter
Entering SIP Addresses Correctly
). Entering “*” as PBX or PSTN
e Forward To
xt field for the PBX call type. The PSTN number length
area code and phone number.
addresses will apply the configuration of Caller ID Based
services to all extensions or PSTN users.
The extension number should be inserted in th
te
depends on the
Fig. III-29 Unconditional Call Forwarding page
Fig. III-30 Call Forwarding – Add Entry page
Send Notification Via SMS checkbox enables SMS notifications sending to the user’s mobile phone when unconditional call forwarding on the
arding on the corresponding extension
his service is not working, contact your system administrator to configure the Mail Settings.
corresponding extension from the certain caller takes place. This checkbox selection enables the Mobile Number text field where the user’s mobile
phone number should be defined. If you feel this service is not working, contact your system administrator to configure the SMS Settings.
Send E-mail checkbox enables email notifications sending to the user’s mailbox when unconditional call forw
from the certain caller takes place. This checkbox selection enables the E-mail Address text field where the user’s email address should be defined.
If you feel t
When saving this call forwarding configuration, a message will notify the user that Many Extension Ringing and Call Hunting services have been
disabled.
The Toggle from Handset checkbox enables toggling the Unconditional Call Forwarding service for a selected caller ON or OFF from the phone
handset by dialing the *4 feature code (for more details, see
Quadro’s Feature
Codes). Dialing this feature code will toggle the Unconditional Call Forwarding service for all entries in the Caller ID Based
ervices table that have the Toggle from Handset option enabled. The service will be activated if it was previously deactivated and deactivated if
Busy Call Forwarding is a service of Quadro that allows the automatic transfer of incoming calls to a variety of other destinations when the called
extension is busy.
The Enable Service checkbox selection activates the busy call forwarding service on the current extension.
S
previously activated.
Please Note: The Toggle from Handset checkbox is only available on the entries different from Any/Other Addresses.
Busy Call Forwarding