User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 33
Outgoing Call Blocking
Outgoing Call Blocking allows blocking unwanted outgoing calls for a Quadro extension where the destination Address service is configured. This
page provides the necessary settings for the outgoing call blocking service. It indicates whether service is enabled for the particular caller and
whether or not a custom message will be used to inform caller about the call being blocked. If the service a particular caller has been enabled by
administrator and has been stated as protected, the user cannot disable it.
Please Note: The administrator can protect the service from being disabled by you. Contact the administrator if you have problems establishing a
certain call.
The Enable Service checkbox selection blocks all calls to the corresponding Address listed in the Caller ID Based Services table associated to the
corresponding extension.
The Send Message to Caller Party checkbox is available when service is enabled and it initiates a message to inform the caller that their line has
been blocked. Otherwise, the calling party will be disconnected without a warning.
The Restore Default Blocking Message File restores the default outgoing call blocking message if another user-defined file has been previously
selected. When the checkbox is selected, the file upload possibility will be disabled.
The Upload New Blocking Message File requires the name of
the desired voice message file. The file needs to be in PCMU
(CCITT u-law, 8 kHz, 8 bit Mono) wave format, otherwise the
system will prevent uploading it and “Invalid audio file, or format
is not supported” warning message will be received. The system
also prevents uploading if there is not enough space available
for the corresponding extension. The “You do not have enough
space” warning will then be received.
Browse is used to browse custom voice message used for
outgoing call blocking.
The Download Custom Blocking Message File link appears
only if a file has been previously uploaded. This link is used to
download the audio file to the PC and opens a window where
the saving location can be specified.
Fig. III-24 Outgoing Call Blocking page
Distinctive Ringing
The Distinctive Ringing service of Quadro allows you to
assign different ringing patterns to individual callers. The
Distinctive Ringing Settings page provides the necessary
settings to receive a distinct ring
depending on the caller’s
address.
Attention: This feature is not functional on IP phones (lines)
extension is assigned to.
The Enable Service checkbox enables the service. Other
components on this page are available only when this
checkbox is selected.
Nick Name requires the callers nickname (if any).
Ringing Pattern lists the possible ringing patterns that may
be assigned to a specified caller.
Preview allows you to play the ringing pattern directly or to
save it to a PC.
Fig. III-25 Distinctive Ringing page