User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 30
Supplementary Services Menu
Fig. III-17 Supplementary Services menu in Dynamo Theme
Fig. III-18 Supplementary Services menu in Plain Theme
Caller ID Based Services
The Caller ID Based Services page provides options to configure a set of telephony settings from the same page. Call Forwarding, Incoming and
Outgoing Call Blocking, Hiding Caller Information, Call Hunting, Many Extension Ringing, Distinctive Ringing and Intercom settings are configurable
from this page.
The Caller ID Based Services page contains a
table listing all caller or called destinations and
the ON/OFF status of the caller ID based
services. The caller or called destination numbers
are used to configure caller ID based services
based. The column headings in the table are
designed as links. By clicking on a column
heading, the table will be sorted by the selected
column. After sorting, (ascending or descending)
arrows will be displayed next to the column
heading.
The table also has Any Address entry that is
undeletable. It is used to configure caller ID
based services for all addressed. When adding a
new caller address Any Address is changed to
Other Addresses. Now there could be different
configurations for the specified addresses and for
all others.
Fig. III-19 Caller ID Based Services page
Add opens the Caller ID Based Services - Add Entry page where a new address can be defined. This page consists of the following components:
The Description text field requires optional information about the address owner.
Call Type lists the available call types:
• PBX - local Quadro extensions and Auto Attendant
• SIP – caller or called destinations reached through a SIP server
• PSTN – caller or called destination dialed from or to PSTN
• Auto – used for undefined call types. In this case, for incoming calls from specific address, configuration of caller ID based services will apply
either to PBX, SIP or PSTN callers. For outgoing calls, the called destination will be reached through Routing.
Address requires a SIP address (see chapter Entering SIP
Addresses Correctly
), an extension or a PSTN number, for whom
supplementary services should be applied. If the address already
exists in the table, selecting Save will give the error “Caller address
already exists”. A wildcard is allowed in this field (see chapter
Entering SIP Addresses Correctly
). Entering “*” as PBX or PSTN
addresses will apply configuration of supplementary services to all
extensions or PSTN users.
The extension number should be inserted in the Address text field
for the PBX call type. The PSTN number length depends on the
area code and phone number.
Fig.III-20 Caller ID Based Services – Add Entry page