User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
The Speed Calling Settings - Add Entry page includes the
following fields and buttons:
Call Type lists the available call types:
• PBX - local calls between Quadro extensions and Auto
Attendant
• SIP – calls through a SIP server
• PSTN – calls to PSTN
• Auto – used for undefined call types. The destination
(independent on whether it is a PBX number, SIP
address or PSTN number) will be reached through
Routing.
The Calling Code (#) requires a key combination to dial the
destination phone number. Only numeric characters are
allowed for this field. If nonnumeric symbols are entered and
the Save button is selected, “Incorrect calling code: no symbol
characters allowed” will appear. This field is limited to two
digits. If the calling code already exists in the Speed Calling
Codes table, the “Speed Calling Code already exists” error will
appear when you select Save.
Fig. III-14 Speed Calling Settings – Add Entry page
Description allows entering a short description about the called destination or simply the username of the remote party.
Depending on the selected call type the Call To text field requires the SIP address, extension or PSTN number that has to be dialed whenever the
calling code is used. The extension number should be inserted in the Call To field for the PBX call type. A SIP address should be entered for SIP call
type. Only SIP registration username can be inserted here to call to the SIP user registered on the same SIP server that the current extension is
registered on. If the SIP server hostname is omitted, the system will automatically set the current extension's registration server hostname instead. A
PSTN number should be inserted for PSTN call type. The PSTN number length depends on the area code and phone number. For the PSTN call
type, the symbols “,”, “p” and “P” are available to be inserted in this field. These symbols are used to insert a 1 second long pause which might be
required by the PSTN dialing rules.
To Add a Speed Calling Code
1. Press the Add button on the Speed Calling Settings page. The Speed Calling Settings - Add Entry page will appear in the browser window.
2. Select the call type from the Call Type drop down list.
3. Choose a Calling Code and enter the Description for the called party.
4. Enter the destination SIP address, extension or PSTN number (dependant on the chosen call type) in the Call To text field according to the
entering rules.
5. To create the Speed Calling Code click on Save.
To Edit a Speed Calling Code
1. Select the checkbox of the corresponding record that has to is be edited in the Speed Calling Codes table
2. Press the Edit button on the Speed Calling Settings page. The Speed Calling Settings-Edit Entry page will appear in the browser window.
3. Change the desired fields.
4. To save the modifications click on Save, to keep the previous data, select Cancel.
To Delete a Speed Calling Code
1. Select the checkbox of the corresponding record that should to be deleted from the Speed Calling Code table. Press Select all if all records re
to be deleted.
2. Press the Delete button on the Speed Calling page.
3. Confirm the deletion by clicking the Yes button. The speed calling code with its parameters will be deleted. To abort the deletion and to keep
the original record in the list, select No.
Account Settings
The Account Settings page provides information on the extension display name, allows changing the user password, enabling user password
protection for incoming/outgoing calls and downloading/uploading of a file with the user-defined voice greetings. All parameters listed on this page
may be modified and submitted. This page consists of the following components:
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 27