User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
PBX Information
The PBX Information page provides read only information about
the extension codecs, other existing extensions and available PSTN
lines on the Quadro depending on the active interface.
The PBX Information displays a list of available codecs for the
corresponding extension, the list of other extensions on the Quadro,
their Display names, the SIP registration username and line number
(if attached). It also displays the ISDN or E1/T1 trunks state and the
destination to route incoming calls. For ISDN or E1/T1, allowed call
types are displayed here. Any shared FXO lines and ISDN trunks
are also visible here.
Fig.III-12 Extension’s Main Page
Speed Calling
The Speed Calling service of Quadro simplifies dialing to the called destination. It provides short digit combinations for frequently dialed phone
numbers. From this page, you may assign short digit combinations to certain destinations to make the dialing easy and avoid long phone number
dialing. To call the corresponding destination using Speed Calling service, dial

+ Speed Calling Code from the handset. The system will dial out
the destination assigned to the Speed Calling Code.
The new Speed Calling entries can also be created from the handset by dialing
 (see Feature Codes for more details).
The Speed Calling Settings page lists all defined Calling
codes with following parameters:
Add opens the Speed Calling Settings-Add Entry page where
the user may add a preferred key combination for Speed
Calling.
Edit opens the Speed Calling Settings-Edit Entry page where
the Speed Calling codes may be edited. The page includes the
same components as the Add Speed Calling Code page.
If no records are selected and the user attempts to Edit or
Delete them, the “No records selected” error message will
appear.
Fig. III-13 Speed Calling Settings page
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 26