User`s guide
QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Extension User’s Menus
The Group List - Add Entry page consists of two text fields
used to insert the Group Key and the Group Name
(optionally). The Group Key should include numeric
characters only and should be unique in the Group List table.
Please Note: Groups with keys equal to extension numbers
on Quadro have a higher priority and will be applied when
sending or forwarding a voice message to the corresponding
destination.
Fig. III-6 Add Group page
The Address List for the Group page contains a table of
addresses where new address may be added to the group
and existing ones may be edited or deleted.
The Add functional link moves to the Address List for the
Group – Add Entry page where new address may be
defined.
Fig. III-7 Addresses List page
Address List for the Group – Add Entry page consists of he
following components:
Call Type lists the available call types:
• PBX - local calls between Quadro extensions and Auto
Attendant
• SIP – calls through a SIP server
• Auto – used for undefined call types. The destination
(independent on whether it is a PBX number or SIP
address) will be reached through Routing.
The Address text field is used to define the address that
ought to be included in the group. The value in this field is
strictly dependent on the Call Type defined in the same
named drop down list. If the PBX call type is selected, the
Quadro extension number should be defined in this field. For
the SIP call type, the SIP address should be defined.
Fig. III-8 Add Address page
To Configure a Group
1. Press Add in the Group List page. Group List - Add Entry page will be displayed in the browser window.
2. Fill in the Group Key and Group Name (optionally) in the same named field.
3. Press Save.
4. Click on the link in the row corresponding to the newly created Group.
5. Press Add in the Address List for the Group page. Address List for the Group – Add Entry page appears.
6. Choose a Call Type from the corresponding drop down list.
7. Define the group member address in the Address text field.
8. Press Save.
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 24