User`s guide
QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Quadro’s Feature Codes
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 12
Get the state of recording
Plays the state of conference recording (started, stopped or paused).
Lock the conference
Locks the conference. When conference is locked, nobody can dial in any more. Service is available for Moderators
only.
Unlock the conference
Unlocks the conference. Now participants are allowed to dial in to the conference. Service is available for Moderators
only.
Dial out to all users with dial out settings enabled
Initiates the dial-out to all participants currently inactive in the conference but configured to be dialed out (also those
added manually from the handset by moderator). Service is available for Moderators only.
Dial out to all users participant to the conference
Initiates the dial-out to all participants currently inactive in the conference. Service is available for Moderators only.
Next Phone with Video Capability
Shows the next phone with video capability. Also switch from automatic mode to manual one.
Previous Phone with Video Capability
Shows the previous phone with video capability. Also switch from automatic mode to manual one.
Automatic Video Switching Mode
With this key combination, the loudest speaking participant is displayed on all video-capable phones. If that
participant has no video capability, a black screen will be displayed.
Start or Resume Conference Recording
Service is available for Moderators only.
Pause Conference Recording
Service is available for Moderators only.
Stop Conference Recording
Service is available for Moderators only.
Request to Speak
With this key combination, listener requests to speak and a notification hand-up icon is displayed in the Conference
Progress table. The moderator can then switch the particular listener either to speaker or lecture mode. With a
speaker permission granted, listener can speak to the conference along with other participants. With a lecturer
permission granted, listener can speak to the conference having all other participants muted in the conference. This
service is available for listener participants only.
Cancel the Request to Speak
With this key combination, listener cancels his request to speak and a notification hand-up icon disappears from the
Conference Progress table. This service is available for listener participants only.
Mute/Unmute
With this key combination, any participants in the conference may mute and unmute themselves during the
conference.
To access a conference from Auto Attendant, dial the Conference ID when in the Connection Menu.