User`s guide

QuadroM 32x/8L/26x/12Li/26xi Manual III: Extension User's Guide Quadro’s Feature Codes

Restore Default
Greeting Message

Restore Default
Incoming Blocking
Message

Restore Default
Outgoing Blocking
Message

Restore Default
Name

Restore Default
Out of Office Message

Stop Recording or
Playback
Greeting Message

Stop Recording or
Playback
Incoming Blocking
Message

Stop Recording or
Playback
Outgoing Blocking
Message

Stop Recording or
Playback
Name Message

Stop Recording or Playback
Out of Office Message
Change Password
Use the digit

to enter the area where the extension’s user may change its password. This password is used to access personal configuration
settings (also voice mailbox) through the Quadro Web Management and the voice mailbox through the handset.

Change Password
Dial Old Password and press pound
Dial New Password and press pound
Confirm New Password and press pound
Services for Incoming Calls
Calling to the extension Calling to the extension’s Voice Mailbox In call queue

Skip the greeting message
and enter the called
extension’s Voice Mailbox
(authentication required)

(during the greeting message)
Calling to the Zero Out
destination

Skip the greeting message
and record a Voice Mail

Leave the call queue and
record a Voice Mail
Recording Box
To reach the extension’s Recording Box from the phone
handset, you should simply call that extension by dialing its
PBX number, SIP address or calling from PSTN.
• During the recording playback  and  keys change
their functionality and serve to rewind and forward the
recording for the certain timeout (by default 3 seconds).
Call the extension to enter its Recording Box
Recording Box extension password may be required
if security is configured


Play First Recording

Get Date/Time Info

Play Previous Recording*

Play Current Recording

Play Next Recording*


Play Last Recording

Delete Current Recording

 
Conference Services
The following feature codes can be used by conference participants during a conference call. (Applicable if the Conference Server and Video
Conferencing feature is activated on the system.)
Invite Participant
To invite a participant, dial *1 + Routing Number). Service is available for Moderators only.

Get the number of participants in the conference
Plays information about the total number of participants in the conference at the certain moment.

QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 11