Installation guide

Quadro Manual I: Installation Guide Step 2: Configuring the QuadroCS

3. Click Next to display the WAN IP Configuration page:

Fig. I-11: WAN IP Configuration page

Your Internet Service Provider (ISP) should provide this information.

• Assign automatically via DHCP - The parameters are set automatically by the ISP.

• Assign Manually requires the administrator to enter the external IP Address, the cor-

responding Subnet Mask, and the IP address of the Default Gateway.

4. Click Next until you reach the last page of the System Configuration Wizard. To com-

plete the basic system configuration and save the settings click the Finish button. The

Confirm Settings page will be displayed. ou must click OK to confirm the changes.

Fig. I-12: Confirm Settings page

Please Note: You have to confirm the settings within 20 minutes. If not, the QuadroCS

will restore the previous configuration and reboot.

If the administrator mistakenly changes the QuadroCS IP address to an unknown

value, the administrator will not be able to access the Web Management.

QuadroCS (SW Version 3.0.x) 15