User Manual
Table Of Contents
- Product Description:
- The screen material included is our award winning ISF Certified Polar Star® which is a front projection material, precisely formulated for environments with minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The Polar Star® is best for family rooms, educational facilities, conference rooms, house of worship or any applications in which incident light is a factor.
JA050218 www.epvscreens.com 5
Notice to Installer:
Please use the following installation instructions to obtain superior optical performance from the
Polar Star® Angular Reflective ALR (Ambient Light Rejecting) Screen.
Make sure to follow these instructions in order for the Polar Star® to perform correctly.
• Angular-Reflective material is not compatible with ultra/short-throw projectors
• Minimum lens throw ratio 1.5x image width
• Ambient light must not come from the same direction as the projector
Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it
is important to position the projector so that the viewer will get the best possible image.
Step 1: Establish the general “eye level” of the viewers
Step 2: Set the appropriate projection level
Step 3: Adjust the screen height level and projection angle
Input Angle (A) = Output Angle (B) aligns with the viewer’s angle