User Manual

Rev.082416-MZ 2 www.EPVscreens.com
Push
( fig.2)
Tension Rod (Horizontal) x 4
Tension Rod (Vertical) x 2
5. After making sure that all four corners join at right angles to form a perfect rectangle, fasten the four angles
together by using the (x8) joint screws included (fig.3).
ATTACHING THE SCREEN MATERIAL TO THE FRAME_
1. Unroll the screen material and lay it down on a clean surface. Then insert the tension rods separately into the edges
of all four corners of the material (see fig.4).
2. Make sure the screen material and frame are both lying face down on a clean, dry, and non-abrasive surface.
Screw
( fig.3)
(Fig. 4)
Screen Material
Screen Material
push
push
push
Tension Rod (Horizontal) x 4
Tension Rod (Vertical) x 2
push
push
push