User Manual

Rev.082416-MZ 1 www.EPVscreens.com

Push

Insert the exposed ends of the joint connectors

into the short (vertical) frame and align the four

corners so that they meet at perfect right angles

3. Insert both elbow joint connectors into the long horizontal frame (fig.1).

4. Join all four frame parts together following the steps showed below. After making sure that all four corners join

at right angles to form a perfect rectangle, fasten the four angles together by using the (x8) joint screws

included (fig.2).

Push

Joint

Long frame

( fig.1)

Push

Short frame

M5×15 Screws

M5×15 screws