User Manual
Table Of Contents
- Product Description:
- The screen material included is our award winning ISF Certified Polar Star® which is a front projection material, precisely formulated for environments with minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The Polar Star® is best for family rooms, educational facilities, conference rooms, house of worship or any applications in which incident light is a factor.
JA050218 www.epvscreens.com 6
Installation
Step 10. Measure the overall length and height of the frame and drill holes for the top brackets. Line up the
wall brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If
not installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws with a
screwdriver. Make sure the brackets are leveled.
Step 11. Position the fixed frame screen onto the top wall brackets as shown below and push down at the center
of the top of the frame to secure.
Step 12. With the frame slightly tilted outward; connect the bottom brackets onto the bottom groove of the
frame. Slowly return the screen to a normal upright position. Once the screen is flush to the wall, secure the
brackets to the wall with a screw. If not installing into a structural wood stud, mark the sites where the hollow
wall anchors will be placed using the same instructions above. With the wood anchor installed, repeat the
process and fasten the brackets with the M5x50 wood screws.