User Manual
Table Of Contents
- Product Description:
- The screen material included is our award winning ISF Certified Polar Star® which is a front projection material, precisely formulated for environments with minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The Polar Star® is best for family rooms, educational facilities, conference rooms, house of worship or any applications in which incident light is a factor.
JA050218 www.epvscreens.com 3
Step 3. Insert the center joint connectors into one-half of the horizontal frame and secure with the
M4x6 screws (2 for both top and bottom). Once secure, connect the other half of the horizontal frame
and fasten with the M4x6 screws (2 for both top and bottom).
Step 4. Insert the springs into the grooves of the frame. The spring hooks should be facing the front
side of the frame. For the correct amount of springs to place into the frame, please refer to the table
listed below.
Note: The springs were inserted into the grooves of the frame before shipment already, please make sure to
avoid the springs slips out from the grooves, when you remove the foam.
Step 5. Connect the elbow joints to top and bottom sections of the vertical frame. Once inserted,
connect the vertical sections to the horizontal frame sections. Make sure all the holes are in alignment
and the frames pieces are flush (no gaps). They should form perfect right angles.
Screen
Size
Qty
A
(Spring)
B
(Spring)
84”
24 14
92”
27 16
100”
29 17
110”
32 19
120”
34 20
135”
38 22
150”
42 25
180”
51 29
200”
57 32