User's Manual

In the Windows Program Manager, select the File menu and

choose Run. In the Command Line box, type a:setup if the

Install disk is in drive a: (or b:setup if it is in drive b:), then

click on OK or press the Enter key.

If you do not have Windows on your system: At the DOS

prompt, type a:guest if the Install disk is in drive a: (or

b:guest

if it is in drive

b:),

and press Enter. Note the drive

letter Guest assigns to your ZIP Drive, then type

d:\scsi\install

(where d: is the ZIP Drive letter), and press Enter.

If you need help, refer to the “Troubleshooting” section of this

manual. There is also troubleshooting information on the ZIP

Install disk in the README.TXT file.

Software Setup

Open My Computer and double click on the floppy drive icon.

Double click on Setup95.

If your system seems slow after

installing Tools 95, it is probably due to the way some plug and

play devices handle system refreshes. To solve this problem, simply

restart your system.

Accessing ZIP Took

After the software installation is complete, you can access tools

for your EPSON drives by clicking the RIGHT mouse button on

the drive icon in My Computer or Windows Explorer. The EPSON

tools available on the drive shortcut menus include:

Copy Machine - Lets you quickly and easily copy one disk to

another using either a single drive or two different drives on

your system.

Format - The format tool includes a Short Format option for

quickly erasing a disk and a Long Format option for verifying

the disk surface. You can also choose to make the disk bootable

or assign a volume name.