User`s guide

Removing and Installing Ink Cartridges
Make sure you have your replacement cartridges handy before you begin. You must install new
cartridges immediately after removing the old ones.
Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print
head nozzles from drying out. Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
1. Turn on your product.
2. Lift up the scanner unit.
Caution: Do not move the print head by hand; otherwise, you may damage your product. Do not
touch the flat white cable inside the printer.
3. If the ink light is on, press the stop button. If the ink light is flashing or off, press and hold the
stop button for 6 seconds until the ink cartridge holder moves to the replacement position.
• If a cartridge is low or expended, the print head moves that cartridge to the indicator position.
Press the stop button. The print head moves the next low or expended cartridge to the indicator
position. Continue to press the stop button until the print head moves to the replacement
position.
116