Specifications

Rev. I Setup for the IM-800 and the DM-M820 2-3
MR Series Technical Reference Manual
Connecting the DM-M820
Be sure to unplug the power cable for the IM-800 or PC before you connect the cables for the
DM-M820.
Connector Cables for a DM-M820 with a Touch Panel and MSR
❏ DC plug Connects to the 12 VDC output of the IM-800.
❏ Display connector Connects to the display port of the IM-800.
❏ Serial port connector Connects to the touch panel COM1 or COM2 port.
Note:
If you are using a DM-M820 with a touch panel, be sure to connect the serial port connector to
COM1 or COM2. Do not use COM3 or COM4.
Also if you are using a DM-M820 with a touch panel, do not install a mouse driver. Installing a
mouse driver can prevent the touch panel from working.
❏ Keyboard
out Connects the keyboard out to the IM-800 keyboard port.
Note:
Be sure not to connect to the mouse port.
❏ Keyboard
in If you are using an external PS/2 keyboard, connect it to the keyboard
in connector.
Connector Cables for a DM-M820 with a Touch Panel and without an MSR
❏ DC plug Connect to the 12 VDC output on the IM-800 or the AC adapter
(OI-MR01).
❏ Display connector Connect to the display port on the IM-800 or PC.
❏ Serial port connector Connect to the COM port for the touch panel on the IM-800 or PC.
Keyboard out
DC plug
Serial port connectors
Display connector
Connectors on the IM-800