Specifications

2-2 Setup for the IM-800 and the DM-M820 Rev. I

If the IM-800 is placed horizontally with the rear cover installed, attach the rubber feet

that are included or leave at least 1 cm {0.4"} of space from the bottom of the rear

cover.

Do not put anything that weighs more than 20 kg {44 lb} on the IM-800 when it is installed

horizontally.

Installing the DM-M820

Cable Arrangement

When you plan your installation of the DM-M820, consider the cable that comes out of the base.

There are two ways you can arrange the cable:

❏ Make a hole in the surface on which you will place the unit and run the cable through the

hole (A in the illustration below).

❏ Remove the tab from the back of the LCD stand and run the cable out of the back of the LCD

stand (B in the illustration below).

CAUTION:

If burrs are left after the tabs are removed, they may cause cuts or scratches. Remove

the burrs with a nipper or file.

Installing face

1cm or more