Specifications

Rev. I Disassembly and Assembly 9-67
MR Series Technical Reference Manual
Power Supply
1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the riser frame. (See page 9-43.)
3. Remove the CD/FDD bracket. (See page 9-49.)
4. Remove the HDD bracket. (See page 9-53.)
5. Remove the two screws (S13) securing the power supply.
6. Remove the power cables connected to the main circuit board.
7. Cut the cable tie and remove the DC24V cable from the DC24V board. (24V model)
Note:
When installing the DC24V cable, use a new cable tie.
screw (S13)
DC 24V cable
cable tie