Specifications

Rev. I Disassembly and Assembly 9-35
MR Series Technical Reference Manual
Removing the Touch Panel Assembly
Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the front case. (See page 9-12.)
5. Remove the rear panel. (See page 9-13.)
6. Release the lock of the connector at the cable connection part. Unplug the touch panel cable
out from the cable of the touch panel board.
Note:
Be careful not to get any foreign material between the LCD and the touch panel.
Cable connection part
Touch panel cable
Cable of the touch
panel board