Specifications

Rev. I Disassembly and Assembly 9-31
MR Series Technical Reference Manual
Touch Panel Circuit Board
Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the rear panel. (See page 9-13.)
5. Remove 4 hex screws (S07) and remove the cable.
6. Disconnect the 2 cables shown below. Remove 2 screws (1051), and remove the touch panel
circuit board.
To install, reverse the removal procedure.
cable
hex screw(S07)
touch panel
circuit board(116)
cable
cable
screw (1051)
screw (1051)
touch panel
circuit board(116)