Specifications

Rev. I Disassembly and Assembly 9-21
MR Series Technical Reference Manual
4. Remove the 6 pieces of exfoliation paper attached to the plates.
5. Use the touch panel position adjust jig to adjust the position of the touch panel.
6. Attach the touch panel, being careful to align the corners.
Note:
Be sure to attach the touch panel with the character side up.
7. Press the touch panel down so that the double-coated tape is bonded to the touch panel.
lower plate (121)
upper plate (120)
exfoliation paper
touch panel
position adjust jig
touch panel (115)
position of the characters