Operation Manual

& “Conguring the Administrator Password” on page 80
& “Restricting Available Features” on page 87
& “Disabling the External Interface” on page 89
Conguring
the Administrator Password
When you set the administrator password, you can prevent the users from changing system management settings.
You can set and change the administrator password using either Web
Cong
, the printer's control panel, or
soware (Epson Device Admin). When using the soware, see the documentation for each soware.
Related Information
& “
Conguring
the Administrator Password from the Control Panel” on page 80
&
“Conguring the Administrator Password Using Web Cong” on page 80
& “Epson Device Admin” on page 121
Conguring the Administrator Password from the Control Panel
You can set the administrator password from the printer's control panel.
1. Select Settings on the printer's control panel.
2. Select General Settings > System Administration > Security Settings.
3. Select Admin Settings.
4. Select Admin Password > Register.
5. Enter the new password.
6. Enter the password again.
7.
Close the conrmation screen.
e administrator settings screen is displayed.
Note:
You can change or delete the administrator password when you select Change or Reset on the Admin Passwordscreen and
enter the administrator password.
Conguring
the Administrator Password Using Web
Cong
You can set the administrator password usingWeb Cong.
1.
Access Web Cong and select the Product Security tab > Change Administrator Password.
Administrator's Guide
Product Security Settings
80