Operation Manual

LDAP Server Setting Items

Items Settings and Explanation

Use LDAP Server

Select Use or Do Not Use.

LDAP Server Address Enter the address of the LDAP server. Enter between 1 and 255 characters of

either IPv4, IPv6, or FQDN format. For the FQDN format, you can use alphanumeric

characters in ASCII (0x20-0x7E) and "- " except for the beginning and end of the

address.

LDAP server Port Number Enter the LDAP server port number between 1 and 65535.

Secure Connection Specify the authentication method when the printer accesses the LDAP server.

Certicate Validation When this is enabled, the certicate of the LDAP sever is validated. We

recommend this is set to Enable.

To set up, the CA

Certicate

needs to be imported to the printer.

Search Timeout (sec) Set the length of time for searching before timeout occurs between 5 and 300.

Administrator's Guide

Function Settings