Operation Manual
1. Select Settings on the home screen.
2. Select General Settings > Network Settings > Wi r e d L A N S e tu p .
3.
Tap Start Setup.
4. Check the message, and then close the screen.
e
screen automatically closes
aer
a
specic
length of time.
5. Connect the printer to a router using an Ethernet cable.
Related Information
& “Connecting to Ethernet” on page 25
Changing to Ethernet Connection Using Web
Cong
Change the Wi-Fi connection to Ethernet connection by using Web
Cong
.
1. Access Web Cong and select the Network tab > Wi- Fi .
When the administrator password has been set, log in as an administrator by entering the user name and
password.
2. Click Disable Wi-Fi.
3. Check the message, and then select OK.
4. Connect the printer and hub (LAN switch) by Ethernet cable.
Note:
You can also change the connection method by using Epson Device Admin. For details, see the guide or help for Epson
Device Admin.
Related Information
& “Accessing Web Cong” on page 28
& “Epson Device Admin” on page 121
Using Port for the Printer
e printer uses the following port. ese ports should be allowed to become available by the network
administrator as necessary.
Administrator's Guide
Appendix
129