Operation Manual
DNS Server
Check the DNS server that is referred by the computer. Conrm the status of the network adapter of the computer
on the same network segment as the printer, and conrm whether it is the same as the DNS setting of the printer.
You can check the DNS setting of the computer as follows.
❏ Wi n dow s : Control Panel > Network and Internet > Network and Sharing Center > Change adapter settings
When there are multiple network interfaces, you can check by entering “ipcong/all” on the command prompt.
❏ Mac OS : System Preference > Network > Advanced... > DNS
Related Information
& “Registering a Destination to Contacts using Web Cong” on page 61
Initializing the Network Settings
Disabling Wi-Fi from Web Cong
Disable Wi-Fi from Web Cong. If you disable Wi-Fi while some devices are connected by Wi-Fi, they are
disconnected.
1.
Access Web Cong and select the Network tab > Wi- Fi , and then select Disable Wi-Fi.
2.
Check the message, and then select OK.
Disconnecting Wi-Fi Direct (Simple AP) from Web Cong
Disconnect Wi-Fi Direct (simple AP) from Web Cong.
1. Access Web
Cong
and select the Network tab > Wi- Fi D i r e c t .
2. Select Disable for Wi - Fi D i r e c t .
3. Click Next
4. Check the message, and then select OK.
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Tap
on the home screen.
2. Select Router.
e
network status is displayed.
3. Tap Change Settings.
Administrator's Guide
Solving Problems
117