Operation Manual
❏ LF Function
Select the line feed command when printing with a driver from a specic operating system.
❏ Paper Source Assign
Set the assignment for the paper source select command. When 4 is selected, the commands
are set as compatible with the HP LaserJet 4. When 4K is selected, the commands are set as
compatible with the HP LaserJet 4000, 5000, and 8000. When 5S is selected, the commands
are set as compatible with the HP LaserJet 5S.
PS3 Menu:
❏ Error Sheet
Select On to print a sheet showing the status when an error occurs during PostScript or
PDF printing.
❏ Coloration
is
item is displayed on the printer that has color print function.
Select the color mode for PostScript printing.
❏ Binary
Select On when printing data that contains binary images. e application may send the
binary data even if the printer driver setting is set to ASCII, but you can print the data when
this feature is enabled.
❏ PDF Page Size
Select the paper size when printing a PDF
le.
If Auto is selected, the paper size is
determined based on the size of the rst page.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏ On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏ O
Displays an error message and cancels printing.
Thick Paper:
Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.
Quiet Mode:
Select On to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no
dierence
in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. e printer prints the
other side aer printing one side. If your printout is smeared, increase the time setting.
PC Connection via USB
When you enable it, you can permit access by the computer that is connected via USB.
When you disable it, you can prohibit printing that is not via the network.
Administrator's Guide
Appendix
90