Operation Manual
Related Information
& “Accessing Web Cong” on page 27
& “Epson Device Admin” on page 78
Changing from Wi-Fi Connection to Ethernet Connection
Changing the Network Connection to Ethernet from the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
2. Select General Settings > Network Settings > Wi r e d L A N S e t u p .
3. Press the OK button.
4.
Connect the printer to a router using an Ethernet cable.
Related Information
& “Connecting to Ethernet” on page 24
Changing to Ethernet Connection Using Web Cong
Change the Wi-Fi connection to Ethernet connection by using Web Cong.
1. Access Web Cong and select the Network tab > Wi - F i .
When the administrator password has been set, log in as an administrator by entering the user name and
password.
2. Click Disable Wi-Fi.
3. Check the message, and then select OK.
4. Connect the printer and hub (LAN switch) by Ethernet cable.
Note:
You can also change the connection method by using Epson Device Admin. For details, see the guide or help for Epson
Device Admin.
Related Information
& “Accessing Web Cong” on page 27
& “Epson Device Admin” on page 78
Administrator's Guide
Appendix
84