Operation Manual

Enabling Wi-Fi Direct (Simple AP) from the Control Panel

1. Select Wi - F i on the printer's control panel.

To select an item, move the focus to the item using the

buttons, and then press the OK button.

2. Select Wi - Fi D i r e c t .

When the Wi-Fi Direct (simple AP) connection is enabled, Wi-Fi connection information is displayed.

3. Select Start Setup.

4. SelectStart Setup.

When Wi-Fi Direct (simple AP) connection is enabled, network (SSID) and password is displayed.

5. Close the screen.

Note:

From smart devices, connect to the printer using the network (SSID) and password displayed on the printer's control

panel.

Changing the Wi-Fi Direct (Simple AP) Settings

When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from Wi- Fi > Wi - Fi D i r e c t >

Change Settings, and then the following menu items are displayed.

To select an item, move the focus to the item using the

buttons, and then press the OK button.

Changing password

Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set

the password in ASCII characters that is displayed on the soware keyboard on the control panel.

When changing the password, all connected devices are disconnected. Use the new password if you want to re-

connect the device.

Disabling Wi-Fi Direct (simple AP)

Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in

Wi-Fi Direct (Simple AP) connection are disconnected.

Deleting the information of the smart device

Delete the (registered) information of the smart device saved to the printer when connecting by Wi-Fi Direct

(simple AP).

If you have an Android device that supports Wi-Fi Direct function, you can connect it to the printer by using that

function. e printer keeps the device information if you register the device as a permitted device or a rejected

device when connecting by Wi-Fi Direct function. Registered device is permitted or rejected when connecting by

Wi-Fi Direct function next time depending on the registered information of the printer.

Note:

To enable/disable Wi-Fi Direct (simple AP) or delete the information of the registered device, you can also set up from

Network tab > Wi - Fi D i r e c t on Web Cong.

Administrator's Guide

Appendix