Operation Manual

❏ ipcong command
Display the connection status of the network interface that is currently used by the computer.
By comparing the setting information with actual communication, you can check whether the connection is
correct. In case there are multiple DHCP servers on the same network, you can nd out the actual address
assigned to the computer, the referred DNS server, etc.
❏ Format : ipcong /all
❏ Examples :
❏ pathping command
You c an
conrm
the list of routers passing through the destination host and the routing of communication.
❏ Format : pathping xxx.xxx.xxx.xxx
❏ Examples : pathping 192.0.2.222
Performing the Connection Test
From the printer or the computer connected to the same segment as the printer, check whether the connection
with the server and folder is correct. is will lead you to solve the problems.
Administrator's Guide
Solving Problems
73