Operation Manual
6. Click OK.
Conrm that an email notication will be sent by causing an event.
Example : Print by specifying the Paper Source where paper is not set.
Related Information
&
“Accessing Web Cong” on page 27
&
“Conguring a Mail Server” on page 37
Items for Email Notication
Items Settings and Explanation
Ink supply unit(s) to be replaced Notice when the ink is expended.
Ink low Notice when the ink is nearing expended.
Maintenance box: end of service life Notice when the maintenance box is full.
Maintenance box: nearing end Notice when the maintenance box is nearing full.
Administrator password changed Notice when administrator password has been changed.
Paper out Notice when the paper-out error has occurred in the specied paper source..
Printing stopped* Notice when the printing is stopped due to paper jam or paper cassette not set.
Printer error Notice when the printer error has occurred.
Wi-Fi failure Notice when the error of the wireless LAN interface has occurred.
Built-in SD card failure Notice when the error of the built-in SD card has occurred. This item is displayed
on a PCL or PostScript compatible printer.
PDL board failure Notice when the error of the PDL substrate has occurred. This item is displayed on
a PCL or PostScript compatible printer.
NFC failure Notice when the error of the NFC substrate has occurred.
Updating Firmware
When new
rmware
is available, updating the
rmware
of the printer improves the function or resolves the
problem.
Updating the Printer's Firmware using the Control Panel
If the printer can be connected to the Internet, you can update the printer's rmware using the control panel. You
can also set the printer to regularly check for rmware updates and notify you if any are available.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
Administrator's Guide
Operation and Management Settings
57