Operation Manual
3. Click Delete.
c
Important:
When clicking Delete, the user account will be deleted without a conrmation message. Take care when
deleting the account.
Return to the user setting list aer a specic length of time.
Enabling Access Control
When enabling access control, only the registered user will be able to use the printer.
1. Access Web Cong and select the Product Security tab > Access Control Settings > Basic.
2.
Select Enables Access Control.
If you select Allows printing and scanning without authentication information, you can print from the
drivers that are not set with the authentication information.
3. Click OK.
Disabling the External Interface
You can disable the interface that is used to connect the device to the printer. Make the restriction settings to
restrict printing other than via network.
Note:
You can also make the restriction settings on the printer's control panel.
❏ NFC : Settings > General Settings > Network Settings > Advanced > NFC
❏ PC Connection via USB : Settings > General Settings > Printer Settings > PC Connection via USB
1. Access Web Cong and select the Product Security tab > External Interface.
2. Select Disable on the functions you want to set.
Select Enable when you want to cancel controlling.
❏ NFC
Disable the NFC interface built in the control panel.
❏ PC Connection via USB
You can restrict the usage of the USB connection from the computer. If you want to restrict it, select
Disable.
3. Click OK.
4. Check that the disabled port cannot be used.
❏ NFC
Conrm that there is no response when holding the device that supports the NFC function like a smart
phone over the printer.
Administrator's Guide
Product Security Settings
52