Operation Manual

Conguring the Administrator Password

When you set the administrator password, you can prevent the users from changing system management settings.

You can set and change the administrator password using either Web Cong, the printer's control panel, or

soware (Epson Device Admin). When using the soware, see the documentation for each soware.

Related Information

& “Conguring the Administrator Password from the Control Panel” on page 46

“

Conguring

the Administrator Password Using Web

Cong

” on page 46

“Epson Device Admin” on page 78

Conguring the Administrator Password from the Control Panel

You can set the administrator password from the printer's control panel.

1. Select Settings on the printer's control panel.

2. Select General Settings > System Administration > Security Settings.

3. Select Admin Settings.

4. Select Admin Password > Register.

5. Enter the new password.

6. Enter the password again.

7. Select OK, and then press the OK button to close the conrmation screen.

e administrator settings screen is displayed.

Note:

You can change or delete the administrator password when you select Change or Reset on the Admin Passwordscreen and

enter the administrator password.

Conguring the Administrator Password Using Web Cong

You can set the administrator password usingWeb Cong.

1. Access Web Cong and select the Product Security tab > Change Administrator Password.

Administrator's Guide

Product Security Settings