Operation Manual

Product Security Settings
is chapter explains the security settings of the device.
Introduction of Product Security Features
is section introduces the security function of the Epson Devices.
Feature name Feature type What to set What to prevent
Setup for the
administrator
password
Locks the system settings,
such as connection setup for
network or USB.
An administrator sets a
password to the device.
You can set or change from
both Web Cong and the
printer's control panel.
Prevent from illegally reading
and changing the
information stored in the
device such as ID, password,
network settings, and so on.
Also, reduce a wide range of
security risks such as leakage
of information for the
network environment or
security policy.
Setup for access
control
If you log on with a user
account registered in
advance, you are allowed to
use the printer.
Protects from illegal access by
any system other than the
authentication system when
using it.
Register any user account.
You can register up to 10 user
accounts.
The risk of leakage and
unauthorized viewing of data
can be reduced by
minimizing the numbers of
functions in accordance with
the business content and the
role of the user.
Setup for external
interface
Controls the interface that
connects to the device.
Enable or disable NFC and
USB connection with the
computer.
❏ NFC: Prevents illegal
printing using NFC.
❏ USB connection of
computer: Prevents
unauthorized use of the
device by prohibiting
printing without going
through the network.
Related Information
& “About Web Cong” on page 26
& “EpsonNet Config” on page 78
& “Conguring the Administrator Password” on page 46
& “Restricting Available Features” on page 50
& “Disabling the External Interface” on page 52
Administrator's Guide
Product Security Settings
45