Operation Manual

Accessing Web Cong

Enter the printer’s IP address into a web browser. JavaScript must be enabled. When accessing Web Cong via

HTTPS, a warning message will appear in the browser since a self-signed certicate, stored in the printer, is used.

❏ Accessing via HTTPS

IPv4: https://<printer IP address> (without the < >)

IPv6: https://[printer IP address]/ (with the [ ])

❏ Accessing via HTTP

IPv4: http://<printer IP address> (without the < >)

IPv6: http://[printer IP address]/ (with the [ ])

Examples

❏ IPv4:

https://192.0.2.111/

http://192.0.2.111/

❏ IPv6:

https://[2001:db8::1000:1]/

http://[2001:db8::1000:1]/

Note:

If the printer name is registered with the DNS server, you can use the printer name instead of the printer’s IP address.

Related Information

& “SSL/TLS Communication with the Printer” on page 98

& “About Digital Certication” on page 98

Using the Print Functions

Enable to use the print function through the network.

To use the printer on the network, you need to set the port for network connection on the computer as well as the

printer’s network connection.

❏ Server / client connection : Set the port on the server computer

For the server / client connection, explain how to set the port manually.

❏ Peer to peer connection : Set the port on each computer

For peer to peer connection, explain how to set the port automatically using the installer available from the

soware disc or Epson's website.

Print Settings for Server / Client Connection

Enable to print from the printer that is connected as the server / client connection.

For the server / client connection, set up the print server rst, and then share the printer on the network.

When using the USB cable to connect to the server, also set the print server rst, and then share the printer on the

network.

Administrator's Guide

Function Settings