Operation Manual

5. Select Manual for Obtain IP Address.
When you set the IP address automatically by using the DHCP function of router, select Auto. In that case, the
IP Address, Subnet Mask, and Default Gateway on step 6 to 7 are also set automatically, so go to step 8.
6. Enter the IP address.
Focus moves to the forward segment or the back segment separated by a period if you select
l and r .
Conrm the value reected on the previous screen.
7. Set up the Subnet Mask and Default Gateway.
Conrm the value reected on the previous screen.
c
Important:
If the combination of the IP Address, Subnet Mask and Default Gatewayis incorrect, Start Setup is inactive
and cannot proceed with the settings.
Conrm
that there is no error in the entry.
8. Enter the IP address for the primary DNS server.
Conrm the value reected on the previous screen.
Note:
When you select Auto for the IP address assignment settings, you can select the DNS server settings from Manual or
Auto. If you cannot obtain the DNS server address automatically, select Manual and enter the DNS server address.
en,
enter the secondary DNS server address directly. If you select Auto, go to step 10.
Administrator's Guide
Network Connection
21