Operation Manual

3. Place the originals in the center of the ADF, facing up.
c
Important:
Do not load originals above the line just under the
d symbol inside the edge guide.
Note:
You can place originals smaller than A4 size with the long edge facing toward the ADF.
4.
Slide the edge guides to the edges of the originals.
e size of the originals is automatically detected.
Note:
Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
Related Information
& “Available Originals for the ADF” on page 53
User's Guide
Placing Originals
54