Operation Manual

❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are pued up with air,
press them down to
atten
them before loading.
❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the
printout.
❏ Do not use envelopes with adhesive surfaces on the aps or window envelopes.
❏ Avoid using envelopes that are too thin, as they may curl during printing.
Related Information
& “Available Paper and Capacities” on page 42
& “Loading Paper in the Rear Paper Feed” on page 48
Setting the Paper Size and Paper Type for Each Paper
Source
Aer loading paper, set the paper size and paper type for each paper source on the control panel. Once these
settings have been made, when automatic paper source selection is enabled, paper is automatically fed from a
paper source that matches the paper size and type settings for the print job. You do not need to select the paper
source each time you print.
1. Enter Setup from the home screen.
2. Select Paper Setup.
3. Select a paper source.
4. Select the paper size and paper type you loaded.
Related Information
& “List of Paper Types” on page 45
User's Guide
Loading Paper
52