Operation Manual
& “Scan Mode” on page 26
& “Fax Settings” on page 36
& “PDL Print Conguration” on page 39
Fax Settings
From the home screen, select Setup > System Administration > Fax Settings.
Menu Settings and Explanations
User Default
Settings
The settings made in this menu become your default settings for sending faxes. For details on the
setting items, See the list of menus in Fax mode.
Send Settings Auto Rotation An A4 size original placed in the ADF or on the scanner glass with its long
edge facing to the left is sent as an A3 size fax.
Enabled: The printer rotates the scanned image to send it at A4 size.
Disabled: The printer sends the document at A3 size and the recipient
machine prints it on A3 paper, or reduces the image to A4 size.
Batch Send See the page that describes this feature.
Save Failure Data Saves documents that failed to be sent in the printer's memory. You can
resend the documents from the Status Menu.
Receive Settings Receive Mode Select the receive mode.
DRD If you have subscribed to a distinctive ring service from your telephone
company, select the ring pattern to be used for incoming faxes (or select On).
Rings to Answer Select the number of rings that must occur before the printer automatically
receives a fax. Select "0" (zero) if you want to receive faxes with no ringing.
Remote Receive When you answer an incoming fax call on a phone connected to the printer,
you can start receiving the fax by entering the code using the phone.
User's Guide
Printer Basics
36