Operation Manual

❏ When scanning from the control panel, set the scan area correctly.

❏ When scanning using the thumbnail preview in EPSON Scan, move the original 4.5 mm (0.18 inch) away from

the edges of the scanner glass. In other situations, move the original 1.5 mm (0.06 inch) away from the edges of

the scanner glass.

❏ When using the thumbnail preview for a large original in Professional Mode, the scanning area may not be

correct. When previewing in EPSON Scan, create marquees of the area you want to scan on the Normal tab in

the Preview window.

❏ Click Conguration in EPSON Scan, and then clear Auto Photo Orientation on the Preview tab.

❏ If Auto Photo Orientation in EPSON Scan does not work as intended, see the EPSON Scan help.

❏ When scanning with EPSON Scan the available scanning area may be restricted if the resolution setting is too

high. Lower the resolution or adjust the scanning area in the Preview window.

Related Information

& “Placing Originals” on page 53

& “Cleaning the Scanner Glass” on page 137

& “Scan Mode” on page 26

The Scanned Image Problem Could Not be Cleared

If you have tried all of the solutions and have not solved the problem, click

Conguration

in the EPSON Scan

window, and then click Reset All on the Other tab to initialize the EPSON Scan settings. If initialization does not

solve the problem uninstall and re-install EPSON Scan.

Related Information

& “Uninstalling Applications” on page 144

& “Installing Applications” on page 146