Operation Manual

Related Information

& “Placing Originals” on page 26

Maintenance

Cleaning the Flatbed Scanner Dock

To keep your Flatbed Scanner Dock in optimum condition, follow the steps below to clean it periodically.

Important:

❏ Never use alcohol, thinner, or corrosive solvent to clean the Flatbed Scanner Dock. ese chemicals can damage

the Flatbed Scanner Dock components and the case.

❏ Be careful not to spill liquid into the scanner mechanism or electronic components. is could permanently

damage the mechanism and circuitry.

❏ Do not spray lubricants onto the Flatbed Scanner Dock.

❏ Never open the Flatbed Scanner Dock case.

1. Press the button to turn o the sheet feed scanner.

Note:

ere is no power button on the atbed scanner.

2. Unplug the AC adapter, and then disconnect the USB cable that is connected to the computer from the Flatbed

Scanner Dock.

3. Wipe

o

any dirt on the outer case with a

so

cloth.

If the case is very dirty, dampen a so cloth with water and wring it out thoroughly, and then wipe o any

remaining stains. Next, use a so dry cloth to wipe the case.

User's Guide

Using the Flatbed Scanner Dock