Operation Manual
Device Information
Status
is menu is only available when the icon is displayed on the home screen.
Indicates the following status. Press the OK button to see more detailed information.
❏ Roller Replacement Soon: e number of scans is close to the life cycle of the rollers. Prepare
replacement rollers.
“Roller Assembly Kit Codes” on page 20
❏ Roller Replacement: e number of scans exceeds the life cycle of the rollers. Replace the rollers.
“Replacing the Roller Assembly Kit” on page 107
❏ Glass Cleaning: Dirt has been detected on the glass surface inside the scanner. Clean the inside of
the scanner. You can continue scanning by pressing the
y button.
“Cleaning Inside the Scanner” on page 102
❏ Regular Cleaning: It is time to clean inside the scanner.
“Cleaning Inside the Scanner” on page 102
Serial Number
Displays the serial number of the scanner.
Current Version
Displays the current rmware version.
Total Number of Scans
Displays the total number of scans.
Number of 1-Sided Scans
Displays the number of single-sided scans.
Number of 2-Sided Scans
Displays the number of double-sided scans.
Number of Scans of Carrier Sheet
Displays the number of scans using a Carrier Sheet.
Number of Scans After Replacing Roller
Displays the number of scans aer replacing the roller assembly kit.
Press the OK button to reset the number
aer
replacing the roller assembly kit.
Number of Scans After Regular Cleaning
Displays the number of scans aer performing regular cleaning.
Press the OK button to reset the number aer performing regular cleaning.
User's Guide
Menu Options on the Control Panel
91