Operation Manual
Slide the receipt into the input slot until it meets resistance.
Note:
❏ Although there may be issues with the scanning quality, you can scan long receipts up to 1,828.8 mm (72 inches) in length
at a resolution of 300 dpi.
❏ You need to specify the paper size in Document Capture Pro.
Click Scan Settings > Detailed Settings on the Scan Settings window to open the Epson Scan 2 window.
ere are three ways to specify the paper size. If the paper length is 863.6 mm (34 inches) or less, you can select Auto
Detect (Long Paper) to detect the size automatically.
If the paper length is more than 863.6 mm (34 inches), you need to select Customize and enter the size of the paper.
You can either enter the width and height of the paper or use Detect paper length instead of entering the paper height.
Related Information
& “Scanning Dierent Sizes or Types of Originals One by One Continuously (Automatic Feeding Mode)” on
page 54
& “Specications of Originals” on page 27
& “Basic Scanning” on page 38
& “Advanced Scanning” on page 54
Placing Envelopes
Load envelopes into the
le
side of the input slot facing up making sure that the opened edge
(ap
side) of the
envelope is facing to the side. For envelopes with the opened edge (ap side) on the shorter side, you can load the
envelope with the bottom edge (non
ap
side) facing into the scanner.
User's Guide
Specications of Originals and Placing Originals
33