User Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Technical Specifications
- Notices
1 The low battery light
2
The Wi-Fi light
3 The ready light
USB connection
Light status Condition/solution
The ready light is on The scanner is turned on and ready to scan.
The ready light is flashing The scanner is scanning or initializing. Wait for the ready light to stop
flashing before turning off the scanner.
The scanner is calibrating or feeding a cleaning sheet.
The ready light and the The scanner firmware is updating. Do not turn off the scanner or
disconnect any cables until the status lights have stopped flashing.
Wi-Fi light are flashing
alternately
The ready light and the A paper is jammed. Reload the original. If the lights continue to flash, a
scanner error may have occurred. Turn the scanner off and then back
Wi-Fi light are flashing at
on again. If the error continues, contact Epson for support.
the same time
Wireless connection
Light status Condition/solution
The ready light is on The scanner is turned on and ready to scan.
The ready light is flashing The scanner is scanning or initializing. Wait for the ready light to stop
flashing before turning off the scanner.
The scanner is calibrating or feeding a cleaning sheet.
The ready light is on and the A WPS or AirStation One-Touch Secure System (AOSS) error has
occurred. Retry the connection.
Wi-Fi light is flashing
The ready light is flashing and The product is scanning or connecting to a wireless network.
the Wi-Fi light is on
60