User Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Technical Specifications
- Notices
2. Press and hold the Connect button and press the power button to turn on the scanner.
3. Hold the Connect button until the ready and Wi-Fi lights flash alternately.
The scanner enters standby mode for WPS connection for two minutes.
4. Enter the PIN code 01234565 on the wireless router or access point within two minutes.
The ready and Wi-Fi lights on the scanner stay on, indicating that the scanner is connected to the
network.
5. Turn off the scanner.
6. Set the connection mode switch on the scanner to Wi-Fi.
34